 |
Team Associated RC8B3.2Car by Team Associated Setups |
 |
Team Associated RC8B3.2eCar by Team Associated Setups |
 |
Sanwa MT-44Radio by Sanwa Setups |
Showing the 5 latest updated items, Click here to see all.
| SETUP | picture_as_pdf | RC8B3.2 | Écurie du Lac | 2022-05-19 |
Category Cars
Class Offroad
Scale/Size 1/8
Power Electric Nitro
Products Car Battery Battery Charger Body Shell ESC Fuel Motor Part or Upgrade Radio Servo Software & Services Tire Tool or Accessory Transponder
Skills Electronics Engine Tuning Fabrication Setup Tuning Time Keeper
![Team Associated RC8B3.2](javascript:showProduct({"id":6522,"picture":null,"specification":null,"notes":null,"user_id":5609,"product_id":248,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2022-05-22T11:14:09.000000Z","updated_at":"2022-05-22T11:14:09.000000Z","status_id":null,"product":{"id":248,"name":"RC8B3.2","shortname":null,"fullname":"Team Associated RC8B3.2","description":"1:8 scale nitro off road racing is one of RC\u0027s most challenging disciplines of racing - it requires attention to detail and demands the highest of standards from equipment. Here to answer the call is the latest development from Team Associated\u0027s Area 51 Design Works, the RC8B3.2 Team Kit! \r\nThe RC8B3.2 is set to push the boundaries of the accolades accumulated by the RC8B3.1:\r\n* 2018 I.F.M.A.R. World Championship, Perth, Australia -- Davide Ongaro \r\n* 2019 ROAR National Championship, Hutto, Texas -- Spencer Rivkin \r\n* 2019 RCGP Series Championship -- Davide Ongaro \r\n* 2019 Italian Nitro Championship -- Davide Ongaro \r\n\r\nThe engineers of Area 51 Design Works focused on key components that improved durability, accelerated maintenance, and expanded upon its race-winning heritage within the RC8B3 platform. An all-new suspension arm design features bottom-loaded inserts to adjust flex characteristics. The rear suspension arm length has been increased while reducing the arm mount width to improve performance in all conditions. A 4-piece center bulkhead allows for easier access to the center differential, making adjustments even faster.\r\n\r\nThe all-new radio tray design features an enclosed battery box, a larger receiver box, integrated switch and transponder mounting, and adjustable flex configurations. Updated shock caps allow the RCB3.2 to be run with the included new stiff bladders, standard bladders, or as emulsion with no bladders -- all with the same cap. The RC8B3 platform was born with Team Associated \u0022Champion by Design\u0022 heritage and the RC8B3.2 plans to continue dominating the 1:8 scale off road racing scene!\r\n\r\nThis vehicle needs extra parts to make it operational. Click on the Specifications tab to see what extra equipment you\u0027ll need to make the vehicle operational, such as motor and battery pack.\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: engine, pipe and header, transponder, servos, receiver, wheels, tires. Assembly and painting required. Features New suspension arm design with inserts for flex adjustments Longer rear suspension arm length with narrow rear arm mounts New center bulkhead splits and has front\/rear specific top halves to prevent brake misalignment Enclosed battery box for quick and easy battery removal Larger receiver box for better wire management One-piece graphite transponder and electronic switch mount Flex Control(R) radio tray has three different configurations for chassis flex adjustment New stiff shock bladder design improves jumping and handling performance Updated shock cap works for bladder or emulsion style shock setups Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws I.F.M.A.R. approved rear wing 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios Updated chassis with chamfered front edges to reduce drag Side guards are now threaded into the chassis from the top side of the car 90% parts compatibility with RC8B3.2e","picture":"images\/1501\/conversions\/W9Fyz1MBZWqSzNdDMXFZrAdmEGI53FjQpI25Zq4B-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC8B3.2\/Team\/","organization_id":13,"user_id":496,"user_is_owner":0,"type_id":"car","year":2020,"created_at":"2020-11-18T01:26:09.000000Z","updated_at":"2021-09-19T17:06:15.000000Z","interactivity_id":null,"status_id":null,"url2":null,"type":{"id":"car","name":"Car","shortname":null,"description":"Car","config":null,"filter":"cars","icon":"directions_car","color":null,"default":0,"disabled":0,"order":1,"type_id":"product","created_at":"2019-10-31T23:45:39.000000Z","updated_at":"2020-10-23T17:47:55.000000Z"}}}, "https://houseofrc.com/setups?user_id=5609&product_id=248&userproduct_id=6522", "https://houseofrc.com/users?product_id=248")){kind=link}
![Team Associated RC8B3.2e](javascript:showProduct({"id":6523,"picture":null,"specification":null,"notes":null,"user_id":5609,"product_id":327,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2022-05-22T11:14:21.000000Z","updated_at":"2022-05-22T11:14:21.000000Z","status_id":null,"product":{"id":327,"name":"RC8B3.2e","shortname":null,"fullname":"Team Associated RC8B3.2e","description":"Electric 1:8 scale buggy is one of off-road\u0027s most popular racing classes. To be a top performer, one must innovate and push the envelope. The designers of Team Associated Area 51 Design Works have done just that. The result is the RC8B3.2e electric 1:8 scale buggy.\r\n\r\nAlready a proven platform, the RC8B3.2e looks to add to the portfolio of victories. No stone has gone unturned when considering the makeup of the RC8B3.2e. The geometry of the suspension has been critically analyzed to determine improved areas of performance, resulting in a new suspension arm design with inserts to adjust flex characteristics and keep dirt out. The combination of a longer rear suspension arm, narrower suspension arm mounts and an overall wider rear track width has proven to increase driver comfort, consistency and speed. \r\n\r\nUpdated shock caps allow the RCB3.2e to be run in two different configurations: As emulsion type with the bleeder screw and seal, or bladder type with the included new stiff bladders, or optional traditional bladders. The side guards have also been improved by changing the attachment method to FHCS that thread into the chassis from the top of the buggy. This increases the durability of the side guard while improving alignment to the chassis. \r\n\r\nThis vehicle needs extra parts to make it operational. Click on the Specifications tab to see what extra equipment you\u0027ll need to make the vehicle operational, such as motor and battery pack.","picture":"images\/1563\/conversions\/6lQEfkNNHzHCcf6WKAQrRlkYjNyrlP5xrH7pi9ho-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC8B3.2e\/Team\/","organization_id":13,"user_id":1049,"user_is_owner":0,"type_id":"car","year":2020,"created_at":"2021-01-07T05:08:06.000000Z","updated_at":"2021-09-19T17:06:39.000000Z","interactivity_id":null,"status_id":null,"url2":null,"type":{"id":"car","name":"Car","shortname":null,"description":"Car","config":null,"filter":"cars","icon":"directions_car","color":null,"default":0,"disabled":0,"order":1,"type_id":"product","created_at":"2019-10-31T23:45:39.000000Z","updated_at":"2020-10-23T17:47:55.000000Z"}}}, "https://houseofrc.com/setups?user_id=5609&product_id=327&userproduct_id=6523", "https://houseofrc.com/users?product_id=327")){kind=link}
![Sanwa MT-44](javascript:showProduct({"id":6524,"picture":null,"specification":null,"notes":null,"user_id":5609,"product_id":161,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2022-05-22T11:15:51.000000Z","updated_at":"2022-05-22T11:15:51.000000Z","status_id":null,"product":{"id":161,"name":"MT-44","shortname":null,"fullname":"Sanwa MT-44","description":"The Sanwa MT-44 is ideal for Racers looking for a remote that has many of the great features that are required when setting up your RC race cars.\r\n\r\nHigh quality\r\nGreat price\r\nSuper fast response\r\n \r\n\r\nThis is the Sanwa MT-44 FH4T\/FH3 4-Channel 2.4GHz Radio System. The MT-44 is the next development for Sanwa offering impressive features in a lightweight and compact transmitter. Most notably, the MT-44 is the first to use low voltage technology as it\u0027s power source, using only three \u0022AAA\u0022 batteries for power, or an optional 1S LiPo battery. This advancement not only helps reduce overall transmitter weight, but it also helps free up size, space and comfort requirements.\r\n\r\nOther worthy features of the MT-44 transmitter include a white backlit HD display, a collapsible handle to provide full view of the LCD, USB charging, telemetry, 1S LiPo capabilities, FH4T and FH3 support.\r\n\r\n \r\n\r\nFeatures:\r\n\r\n High-resolution liquid crystal display\r\n Dot size equivalent to that of the M12S\r\n Optimization of steering \u0026 throttle position, even without offset bracket\r\n Industry\u0027s first low-voltage transmitter\r\n Powered by 3 \u0022AAA\u0022 batteries (supports 1S LiPo)\r\n USB charging support\r\n Very Lightweight\r\n Quick setup function\r\n Safety link\r\n Racing mode\r\n Custom menu\r\n Supports micro SD card\r\n Telemetry switch function\r\n Clock function\r\n Environmental temperature display function\r\n LOG data CSV output\r\n Supports CODE 10 (name correspondence)\r\n Telemetry data 3 simultaneous data display\r\n Supports multiple languages ??(Kanji compatible)\r\n\r\nOther Functions:\r\n\r\n Large Full Dot LCD Monitor\r\n White LED Backlight\r\n Fully Adjustable Trigger\r\n Telemetry function\r\n Built-in antenna body\r\n Menu selector (multi selector operation)\r\n ST, TH tension adjuster\r\n Dual rate\r\n End point adjustment\r\n Anti-lock brake function\r\n Servo speed\r\n Offset ? Trim \/ sub trim\r\n Servo Reverse\r\n Curve (Exponential \/ Adjustable Rate Control)\r\n AUX 1 (Select 3ch operation type, same function as MT-4S)\r\n AUX 2 (Select 4ch operation type, same function as MT-4S)\r\n Failsafe function (radio wave \/ battery)\r\n Timer (wrap \/ interval \/ down)\r\n 20 model memory (when using SD card 250 models)\r\n Model name (12 characters)\r\n Model (select \/ clear \/ copy)\r\n Direct model select\r\n Trim Type (Center \/ Parallel)\r\n Throttle Type (70: 30\/50: 50)\r\n RF MODE setting (FH4T \/ FH3)\r\n Response mode setting (NOR \/ SHR \/ SSR) * Attention\r\n Key Assign (SW \/ TRIM \/ DIAL \/ LEVER)\r\n AUX TYPE setting\r\n CODE AUX (with name change function)\r\n Step AUX (steps 1 to 100)\r\n Point AUX (2 to 6 points)\r\n 4WS mixing (FRONT \/ REAR \/ NORMAL (in-phase) \/ REVERSE (opposite phase))\r\n MOA mixing (front wheel drive \/ four wheel drive \/ rear wheel drive) * Variable drive ratio\r\n AUX mixing (ST mixing, TH mixing)\r\n Buzzer (scale and volume change)\r\n Transmitter battery alarm\r\n LCD contrast\r\n Volume adjustment\r\n Mechanical steering angle adjustment\r\n Small grip pad included\r\n\r\nNOTE: SSL (Sanwa Synchronized Link) System\r\n\r\n SANWA SSL SYSTEM\r\n When used with compatible RX-472, RX-482, Super Vortex Series, SV-Plus Series, the setting of ESC etc. by Transmitter is available through SSL functions while driving.\r\n Since the setting can be done without the stop of car, the detailed adjustment in accordance with Race conditions is available without interruption of Intervals and the change of machine conditions.\r\n RESPONSE OF TELEMETRY SYSTEM\r\n It is often said that telemetry system reduce response speed. However, SANWA Original Data Processing and Algorithm Design makes Telemetry possible without response speed reduction.\r\n Sanwa\u0027s Excellent Telemetry System has no response speed reduction.\r\n RESPONSE MODE\r\n Please do not use Analog Servo for SHR mode or SSR mode. If analog servo is used for SHR mode or SSR mode, the servo will be broken and will not work.\r\n Digital servo (SRG series, Digital ERG series, SDX series) can be used both for NOR mode and SHR mode.\r\n SSR mode can be used only by SRG series servo.\r\n In SHR or SSR mode, BL-RACER, BL-FORCE, BL-SPORT, F2000, F2200, F3000, F3300, SBL-01, SBL-02 and SBL-03CR do not work. Please use NOR mode for the above ESC.\r\n SV-08, HV-10, HV-12, F2500 can work by NOR\/SHR MODE","picture":"images\/1419\/conversions\/PyiUq4g17UztfmpwBpKrkbLj6yyODVsI4rvaC6kO-preview.jpg","url":"http:\/\/sanwa-denshi.com\/rc\/car\/propo\/mt-44.html","organization_id":6,"user_id":262,"user_is_owner":0,"type_id":"radio","year":null,"created_at":"2020-10-12T08:47:13.000000Z","updated_at":"2021-09-19T17:05:43.000000Z","interactivity_id":null,"status_id":null,"url2":null,"type":{"id":"radio","name":"Radio","shortname":null,"description":"Radio gear including receivers and servos","config":null,"filter":null,"icon":"wifi","color":null,"default":0,"disabled":0,"order":1000,"type_id":"product","created_at":"2019-10-31T23:45:39.000000Z","updated_at":"2020-10-23T17:59:32.000000Z"}}}, "https://houseofrc.com/setups?user_id=5609&product_id=161&userproduct_id=6524", "https://houseofrc.com/users?product_id=161")){kind=link}
![SETUP](javascript:showSetup({"id":269,"name":"SETUP","notes":null,"file":"setups\/PCurAb0tD0zBYP6YbOKl6dWRmkzPVkeVrHWCvFP3.pdf","user_id":5609,"userproduct_id":6522,"product_id":248,"place_id":1283,"event_id":null,"evententry_id":null,"setup_date":"2022-05-19T00:00:00.000000Z","created_at":"2022-05-22T11:20:56.000000Z","updated_at":"2022-05-22T11:20:56.000000Z","url":null,"show_url":"https:\/\/houseofrc.com\/setups\/269","product":{"id":248,"name":"RC8B3.2","shortname":null,"fullname":"Team Associated RC8B3.2","description":"1:8 scale nitro off road racing is one of RC\u0027s most challenging disciplines of racing - it requires attention to detail and demands the highest of standards from equipment. Here to answer the call is the latest development from Team Associated\u0027s Area 51 Design Works, the RC8B3.2 Team Kit! \r\nThe RC8B3.2 is set to push the boundaries of the accolades accumulated by the RC8B3.1:\r\n* 2018 I.F.M.A.R. World Championship, Perth, Australia -- Davide Ongaro \r\n* 2019 ROAR National Championship, Hutto, Texas -- Spencer Rivkin \r\n* 2019 RCGP Series Championship -- Davide Ongaro \r\n* 2019 Italian Nitro Championship -- Davide Ongaro \r\n\r\nThe engineers of Area 51 Design Works focused on key components that improved durability, accelerated maintenance, and expanded upon its race-winning heritage within the RC8B3 platform. An all-new suspension arm design features bottom-loaded inserts to adjust flex characteristics. The rear suspension arm length has been increased while reducing the arm mount width to improve performance in all conditions. A 4-piece center bulkhead allows for easier access to the center differential, making adjustments even faster.\r\n\r\nThe all-new radio tray design features an enclosed battery box, a larger receiver box, integrated switch and transponder mounting, and adjustable flex configurations. Updated shock caps allow the RCB3.2 to be run with the included new stiff bladders, standard bladders, or as emulsion with no bladders -- all with the same cap. The RC8B3 platform was born with Team Associated \u0022Champion by Design\u0022 heritage and the RC8B3.2 plans to continue dominating the 1:8 scale off road racing scene!\r\n\r\nThis vehicle needs extra parts to make it operational. Click on the Specifications tab to see what extra equipment you\u0027ll need to make the vehicle operational, such as motor and battery pack.\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: engine, pipe and header, transponder, servos, receiver, wheels, tires. Assembly and painting required. Features New suspension arm design with inserts for flex adjustments Longer rear suspension arm length with narrow rear arm mounts New center bulkhead splits and has front\/rear specific top halves to prevent brake misalignment Enclosed battery box for quick and easy battery removal Larger receiver box for better wire management One-piece graphite transponder and electronic switch mount Flex Control(R) radio tray has three different configurations for chassis flex adjustment New stiff shock bladder design improves jumping and handling performance Updated shock cap works for bladder or emulsion style shock setups Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws I.F.M.A.R. approved rear wing 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios Updated chassis with chamfered front edges to reduce drag Side guards are now threaded into the chassis from the top side of the car 90% parts compatibility with RC8B3.2e","picture":"images\/1501\/conversions\/W9Fyz1MBZWqSzNdDMXFZrAdmEGI53FjQpI25Zq4B-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC8B3.2\/Team\/","organization_id":13,"user_id":496,"user_is_owner":0,"type_id":"car","year":2020,"created_at":"2020-11-18T01:26:09.000000Z","updated_at":"2021-09-19T17:06:15.000000Z","interactivity_id":null,"status_id":null,"url2":null},"user_product":{"id":6522,"picture":null,"specification":null,"notes":null,"user_id":5609,"product_id":248,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2022-05-22T11:14:09.000000Z","updated_at":"2022-05-22T11:14:09.000000Z","status_id":null,"product":{"id":248,"name":"RC8B3.2","shortname":null,"fullname":"Team Associated RC8B3.2","description":"1:8 scale nitro off road racing is one of RC\u0027s most challenging disciplines of racing - it requires attention to detail and demands the highest of standards from equipment. Here to answer the call is the latest development from Team Associated\u0027s Area 51 Design Works, the RC8B3.2 Team Kit! \r\nThe RC8B3.2 is set to push the boundaries of the accolades accumulated by the RC8B3.1:\r\n* 2018 I.F.M.A.R. World Championship, Perth, Australia -- Davide Ongaro \r\n* 2019 ROAR National Championship, Hutto, Texas -- Spencer Rivkin \r\n* 2019 RCGP Series Championship -- Davide Ongaro \r\n* 2019 Italian Nitro Championship -- Davide Ongaro \r\n\r\nThe engineers of Area 51 Design Works focused on key components that improved durability, accelerated maintenance, and expanded upon its race-winning heritage within the RC8B3 platform. An all-new suspension arm design features bottom-loaded inserts to adjust flex characteristics. The rear suspension arm length has been increased while reducing the arm mount width to improve performance in all conditions. A 4-piece center bulkhead allows for easier access to the center differential, making adjustments even faster.\r\n\r\nThe all-new radio tray design features an enclosed battery box, a larger receiver box, integrated switch and transponder mounting, and adjustable flex configurations. Updated shock caps allow the RCB3.2 to be run with the included new stiff bladders, standard bladders, or as emulsion with no bladders -- all with the same cap. The RC8B3 platform was born with Team Associated \u0022Champion by Design\u0022 heritage and the RC8B3.2 plans to continue dominating the 1:8 scale off road racing scene!\r\n\r\nThis vehicle needs extra parts to make it operational. Click on the Specifications tab to see what extra equipment you\u0027ll need to make the vehicle operational, such as motor and battery pack.\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: engine, pipe and header, transponder, servos, receiver, wheels, tires. Assembly and painting required. Features New suspension arm design with inserts for flex adjustments Longer rear suspension arm length with narrow rear arm mounts New center bulkhead splits and has front\/rear specific top halves to prevent brake misalignment Enclosed battery box for quick and easy battery removal Larger receiver box for better wire management One-piece graphite transponder and electronic switch mount Flex Control(R) radio tray has three different configurations for chassis flex adjustment New stiff shock bladder design improves jumping and handling performance Updated shock cap works for bladder or emulsion style shock setups Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws I.F.M.A.R. approved rear wing 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios Updated chassis with chamfered front edges to reduce drag Side guards are now threaded into the chassis from the top side of the car 90% parts compatibility with RC8B3.2e","picture":"images\/1501\/conversions\/W9Fyz1MBZWqSzNdDMXFZrAdmEGI53FjQpI25Zq4B-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC8B3.2\/Team\/","organization_id":13,"user_id":496,"user_is_owner":0,"type_id":"car","year":2020,"created_at":"2020-11-18T01:26:09.000000Z","updated_at":"2021-09-19T17:06:15.000000Z","interactivity_id":null,"status_id":null,"url2":null}}})){kind=link}